Leather Lunchbox

June, 12 2012 14:00

Posted inInner Ideas

Unfortunately now is no time for lunch. But tomorrow finally I'll have my selfmade food container. Like a real 30's worker! Stop shabby refectory, stop disgusting meal...now it's possible to create an amazing lunchbox.

 

Designed by Portland based brand Wood&Faulk. 

 

Photo by Lisa Warninger


Photo by Lisa Warninger


Photo by Lisa Warninger


Photo by Lisa Warninger

 

I report tutorial from Design Sponge here...where also you can download the free template

 

  • 1. Cut your leather pieces and trim any frayed edges to a smooth cut. I’m using leather that is 6 to 7 oz. thick, and you’ll need something stiff to provide strength for the handle. If you want to use thinner leather, try cutting an additional handle from the template and sew those two pieces together for more stiffness.
  • 2. Take each of your interior flaps and prepare to mark your sewing holes. Using your stitching spacer and a ruler or straight edge, mark your holes. Use a stitching spacer with a large void, as we’ll be using thick thread, and a long stitch works best.


 

 

  • 3. Glue the flaps aiming inward to your main piece with contact cement. Use only a strip under where the stitching will go so your pieces stay aligned when punching holes and sewing.
  • 4. Once the glued pieces have set up, you can start punching holes for sewing. I’m using a punch, but you can use an awl instead. Punch holes according to the spacing marks through both pieces of glued leather. While you’re at it, pinch the handle-receiver end together and also the flap ends and punch some sewing holes through both layers there, too. You can freehand them, but try to maintain the stitch spacing you’ve been using.


Photo by Lisa Warninger


  • 5. The final step is to hand-sew your pieces with two needles and thick waxed thread. Using the two-needle method and backstitching on your ends will give you a sturdy, long-lasting seam.